Margraf
en

SMOKE PURIFIER MOD. MGI 400 M³/H

200339
The fume purifier mod. MGI 400 m³/h combines in a centralized unit the pre-filtration of G2 and G3 (EN779) class fiberglass and polyester media which guarantee an average arrestance of 80 to 90%, with the odor-absorbing capacity of carbon active for the reduction of VOCs and acetones.

Code 200339

The fume purifier mod. MGI 400 m³/h combines in a centralized unit the pre-filtration of G2 and G3 (EN779) class fiberglass and polyester media which guarantee an average arrestance of 80 to 90%, with the odor-absorbing capacity of carbon active for the reduction of VOCs and acetones. Ideal for the Laser Mod. MG-E 50 and 70.


The last stage is made up of a cell with class F9 microfibre panels, with average fractional efficiency at 0.4 ?m EN779 above 95% or class H13 with
EN1822-1 MPPS efficiency of 99.95%, allowing the reintroduction into the air, after verifying compliance with current regulations.
The Air Purifier mod. MGI 400 allows a motor power of 0.55 kW and a maximum air flow rate of 400 m³/h with F9 filter.

Description Internal filters
- Primary filter SP 100 mm
- Secondary filter SP 50 mm
- Post activated carbon filter SP 23 mm
- Final absolute filter F9 version
- Final absolute filter Hepa H13 version

- Motor power: 0.55 Kw 0.55 Kw - high efficiency
- Power frequency voltage: 230 V single-phase 50 Hz
- Maximum intake air flow rate: 400 m3/h at speed
- Vertical mounting: YES
- Horizontal mounting: YES
- Connections inlet tubes diameter: 100 mm
- Outlet tube connections diameter: 100 mm
- Worktop/Laser source power 500 x 300/60w
- Noise level < 73 Dba
- Dimensions: 460x660x1000 mm
- Weight: 60 kg

Related products

ROTARY FOR LASER MARKING

An accessory designed for laser marking...

SMOKE PURIFIER MOD. MGI 1400 M³/H

1.5 HP wheeled unit for the extraction...

SMOKE EXTRACTOR MODEL MGI 120W

The 120W fume extractor is the ideal...

LOCKING BRACKET FOR LASER MARKERS

An accessory designed for the secure...

Contact us now